Buy MLCS 8391 Shaker Raised Panel Door Cabinetmaker Set, 5-PieceMLCS 8391 Shaker Raised Panel Door Cabinetmaker Set, 5-Piece Product Description:
- Make simple but elegant shaker raised panel doors and drawers
- Professional quality 5-piece set
- Wood storage box included
- Quality, carbide-tipped router bits, 1/2-Inch shank
- For use in a router table
Product Description
This professional quality 5 piece set features 1/2-Inch shank router bits with carbide cutters. Contains all of the bits needed to make custom Shaker cabinetry for a kitchen or fine Shaker furniture. The Shaker philosophy was to remove unnecessary ornament and to find 'beauty in utility'. Shaker furniture reflected an ethic of modesty, equality, order and harmony. Use with wood stock up to 3/4-Inch thickness. Set includes: 1) Shaker Raised Panel with Under cutter Bit: Put a simple but timeless edge on the free floating raised panel in your door. 2-1/20-Inch large diam. 1-1/4-Inch depth of cut. 2) Matched Rail and Stile 2 Piece Set creates precisely mated rail and stiles that form a very durable frame. 1-5/8-Inch large diam. 3) Glue Joint Bit is invaluable when the central panel has to be wider than your stock width. Use two or more pieces with reverse cut edge joints to achieve the required width. 1-1/4-Inch maximum height. 1-3/4-Inch large diam. 4) The Drawer Lock Bit creates matching reverse cuts in the drawer front and sides so the pieces fit together, forming a very strong joint. 1-3/4-Inch large diam. All Bits 1/2-Inch shank.Make simple but elegant shaker raised panel doors and drawersProfessional quality 5-piece setWood storage box includedQuality, carbide-tipped router bits, 1/2-Inch shankFor use in a router table
Customer Reviews
Most helpful customer reviews
5 of 5 people found the following review helpful.
MLCS Shaker bit set
By Ronald Haefner
This set worked very well for me. I would suggest offsetting the two cutter heads of the style cutter so that the top cutter is rotated 90 degrees from the bottom half of the cutter. This seems to help reduce what is already minimal vibration and seems to produce a cleaner smoother cut. I did the same with the rail and the raised panel bit.These bits work well in both my shaper (Grizzly G0510Z) and my router tables, though I prefer the shaper. Good bit set and would not hesitate to try others from this vendor.
2 of 2 people found the following review helpful.
MLCS 8391 Shaker Raised Panel Door Cabinetmaker Set, 5-Piece
By Ronald J. Wichman
This set has a great price. The one drawback I ran into was trying to center the raised panel in the middle of a 3/4 inch board. If you center it, the bit will not cut to the top edge of the board. The bit needs to be wider.Otherwise, these bits worked flawlessly.Note, other R&S bit sets I own will work with board widths to 1" or more.
1 of 1 people found the following review helpful.
Shaker Raised Panel Cutter Set
By David Tigwell
This set is difficult to beat for the price. The bits are sharp and accomplished virtually perfect cuts in a full set of oak cabinet doors. There was very little chip-out, and the cuts were very clean, even on the end grain. There really is no comparison to 1/4" cutters, and I'd advise not even trying them. Just make sure you have a router that's powerful enough and has speed control, as well as a good, very rigid table and fence. I made a simple jig with toggle clamps for holding the rails and providing a zero-clearance side stop.The set includes a set of shims, extra nuts, and bearings. After shimming the cutters, the joints were as tight as I wanted them and fit perfectly. The only thing is there were absolutely no instructions included in the package. Before use, go to the MLCS web site: [...] and read them for proper set up.
See all 3 customer reviews...Latest Price:
See on Amazon.com!
More Info:
See on Amazon.com!
See Customers Review:
See on Amazon.com!
Buy Pure Pashmina Shawl Black 2 Ply
Don't buy it!
