![]( "VideoSecu Heavy Duty Dual Arm 21")
Buy VideoSecu Heavy Duty Dual Arm 21" Long Cantilever Swingout Articulating TV Wall Mount Bracket for 32"-65" Plasma LCD LFD LED TV Flat Screen Display B96VideoSecu Heavy Duty Dual Arm 21" Long Cantilever Swingout Articulating TV Wall Mount Bracket for 32"-65" Plasma LCD LFD LED TV Flat Screen Display B96 Product Description:
- Fits most 32"-65" flat panel screen LCD LED TV displays (please check VESA and weight)
- Max Loading capacity up to 165 lbs. Fit VESA 200X100mm up to 684x400mm
- Extends up to 21" from the wall, Collapses about 4.5" from the wall
- Cable management on arm. Tilt up and down, swivel left and right
- Standard hardware pack included; Post-installation level adjustment allows the TV to perfectly level
Product Description
This mount is one of the strongest mounts on the market today. It has easy to follow instructions with a Durable Powder Coated Finish. The color for this mount is Black Will this mount fit my TV? First, check the weight of your TV. It must be less than 165lbs. Second, look at the back panel of your TV. If your TV has 4 holes on the back of the screen, measure the vertical and horizontal distance between the holes. If the vertical distance is within 16 inch, horizontal distance is within 27 inch (VESA 684x300 600x400 600x300 600x200 500x300 400x400 400x200 200x200 200x100mm), then this bracket will fit. Finally, the width of your TV should be 32" or above, otherwise the mount is too wide to hide behind your TV. If you are not sure whether this fits your TV , please contact us, we will check for you. This mount is VideoSecu brand. Please report to Amazon if the product you received do not bear VideoSecu logo.
Customer Reviews
Most helpful customer reviews
6 of 6 people found the following review helpful.
Perfect for not so perfect mounting areas
By Tim Wright
I bought this mount due to very limiting space in my bedroom to mount a tv. I needed one with a lot of movement, and the ability to pull far from the wall, this way it could be mounted in a corner. This did the job perfectly. The mount had plenty of holes for the mounting bolts, which helped out with the studs on that section of my wall not being standard distance apart.PROS:*Very Sturdy*Plenty of movement, and ease of movement*Backplate has a variety of mounting holes (ease of mounting)CONS:*Terrible instructions*Bit of work to installThe instructions were absolutely terrible for this thing. They were not needed for me, but I can see where it would be a problem for many other people. Its a bit unwieldy securing it, so if you are weak, don't install it alone. The tools you will need are: Drill and bits (pilot holes into the studs), nut driver or rachet, level, stud sensor, and screwdrivers.All in all, an excellent product. Took me about 30 minutes from receiving the box to mounting it on the wall, but expect it to take upwards of an hour and a half. It holds up my 46" with ease, and allows me to swivel the TV easily.
5 of 5 people found the following review helpful.
Good strong mount, buy it
By Robert E. Duncan
As most of the other reviews claim, this is a good value. It's easy to install, but the instructions are confusing as heck, maybe worse than none at all.Hanging the part that goes on the wall is easy, make sure it's level and screw it securely to the studs - 16" maximum, so forget this one if you have 24" studs.The part that mounts to the TV is a little more complex, especially if you try to follow the instructions. I just laid it out on the bed and started assembling and it became obvious. Lots of extra screws and washers to accommodate different tv's. Set them aside, there really aren't many required to put the unit together.Once it's loosely assembled, attach to the TV with 4 screws (this is where all those extra's come in - choosing the right size screw for your tv). Then center everything by sliding the rails and brackets, tighten and hang the whole thing to the wall. It's good to have a helper when lifting the tv up.Figure about an hour if you have tools and a helper available.About all you could do wrong is attach a piece upside down, and if you did, you couldn't hang the tv, so it wouldn't be a real problem or slow you down more than a couple minutes while you fix it.Definitely a strong unit; for that alone I would recommend it. But it looks fine, and the price is right.
4 of 4 people found the following review helpful.
Great Mount
By bts1225
This mount is great and is holding my 58" Panasonic Plasma 3D TV without any problems. I can extend this mount all the way out and my TV is still very sturdy. Another great thing about this mount that they don't mention is that behind the head that connects to the TV are three screws. The two screws at the bottom have slotted holes in them that you can use to adjust the level of the TV incase the mount is not perfectly level. This is a wonderful thing to have and I love this mount. Totally worth the money.
See all 38 customer reviews...Latest Price:
See on Amazon.com!
More Info:
See on Amazon.com!
See Customers Review:
See on Amazon.com!
![Buy VideoSecu Heavy Duty Dual Arm 21]()
Buy 10K White Gold 0.15 ct. Diamond Bangle Bracelet
Machine is great - Drum unit is a nightmare
This is how printer & copier manufactures make money.
