
Logisys Corp. Assembled Clear Case CS888CL, Clear Product Description:
- Front USB and Audio Jacks
- 3 80mm Blue Led fans with blade fan grill
- 4 5.25" bays, 2 3.5" bays and 6 HDD bays
Product Description
Logisys Pre-Assembled Clear Case is ready to go right out of the box, This Case also comes with three 80mm Blue LED fans with blade fan grills included! There is plenty of room for different devices with four 5.25" bays, two 3.5" bays, and six HDD bays. There are also front usb and audio jacks for any gaming devices or other usb devices
Customer Reviews
Most helpful customer reviews
4 of 4 people found the following review helpful.Case Review
By George
So I initially purchased this case soley on aesthetic reasons being that it is a clear case and I wanted to build my own PC. I loved that the case is see-through but unfortunately the case had too few useful features that I feel should be standard. So here is my personal PROs and CONs list for this product:PROs:1. Case is transparent2. PriceCONS:1. 80mm fans provide too little cooling. I built a pretty top-notch PC and i felt 3 tiny, cheap 80mm fans was not going to be sufficient cooling for the type of hardware I wanted to install.2. No water cooling support. Again, this probably isn't 100% necessary for most builds but I feel we should have least have the option to do so and this case does not provide that.3. Zero cable management. I was kind of disappointed to see this case had no cable management being that everything you put in here would be visible. I had envisioned an awesome-looking tower with all it's components revealed but without any cable management, it would just seems like a case full of wire clutter with flashy LEDs.4. The screw holes drilled into the case and the screws that go into them seem to be poor quality. I was actually a bit nervous when screwing or unscrewing any of the screws from the case because it almost felt like i was going to strip the holes drilled into the case which would have been disasterous.5. I realize this is a mid-tower case but it felt a bit too compact compared to other available options. Also I disliked that the power supply needed to be installed at the top instead of the bottom.So to conclude I feel that if you are planning to build a low-end machine, this case may be appropriate for you. But if you are building a decent rig - for another $20-$30, you could purchase a case that seems infitely times better than this case and be just as awesome-looking even if it isn't see-through. In the end I decided to return it and go with the NZXT Phantom 410 Mid Tower Case for $99 and I couldnt be happier with it!
2 of 2 people found the following review helpful.good change of pace
By RDS
The product for the money is well built, but keep in mind that when building on an acrylic case you have to be a lot more gentle than you would on a regular metal case. Most screws can only be hand tightened softly or else something will strip out, and handling the case is more a case of using kid gloves because you do not want to scratch it up. Overall layout on everything was great and you can do some cool effects with led fans and accessories. This is not a case you are going to want to move around a lot, but if you are going to put it in one place and leave it alone more power too you. Power buttons and all hook ups worked fine. Ps- remember cable management and hiding the cables and wiring is going to be a lot harder as there are not as good of options in that area with an acrylic case.
0 of 0 people found the following review helpful.Great case but....
By Ghyschur
It has a great glow so now I do not need a night light. haha. The only problem I have with it is that the drive bays are not all that great. My cd drive, card reader and hot-swap are all balancing with just eh support on the back screws and the bay cover underneath the drivers. You can not put all of the screws in the support the drives all the way around because the screw holes and the case rack for the drives hardly match up. Also, the front USB and audio jacks are quite loose. Every time I plug anything into them, the little circuit board moves back and up. Maybe I have to "jimmy-rig" it stay where it should be. Last thing, I do not feel like the fans are spinning as fast as they should because sometime it feels like there is warm air coming out of the back and side when it should be cold just like it was back when I got it. I have had the case for about a month and a half now and I am thinking about getting a different one.Other than all that, it fits all of your computer guts you could ever need. My mother board is standard ATX, but I have a bit more space to the extra motherboard stands. I guess if you have a larger ATX board.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
